The old frond bases are stuck in place by the time the arrive, next to impossible to move the old ones back.Dave Brown wrote:It is not sunken on ours either. it is the last flush of fronds were still almost upright when chainsawed off, and once cut the stipes don't move outward, just leaving a flat plate above the crown.fern Rob wrote:In nature their crown would not be a sunken
Mild late winter/early spring gets the Dicksonia antarctica all flushed
Re: Mild late winter/early spring gets the Dicksonia antarct
- Dave Brown
- Site Admin
- Posts: 19742
- Joined: Sun Jul 09, 2006 10:17 am
- Location: Chalk, (Thames Estuary) Kent, England 51.5N 0.3E
- Contact:
Re: Mild late winter/early spring gets the Dicksonia antarct
Starting freom the outside, pull them outwards as much as you can and snip at that point.fern Rob wrote:
The old frond bases are stuck in place by the time the arrive, next to impossible to move the old ones back.
Best regards
Dave
_________________________________________________
Roll on summer.....
http://www.hardytropicals.co.uk
Dave
_________________________________________________
Roll on summer.....
http://www.hardytropicals.co.uk
Re: Mild late winter/early spring gets the Dicksonia antarct
If I do that then I could move the new fronds forwards as they are movable at this point and place some fleece in the crown to keep it open, and keep the fronds in place.
Re: Mild late winter/early spring gets the Dicksonia antarct
Thanks. I did this to one of my ferns which had a chainsaw cut and the crown was low down. The fern looks better and the the fronds, which have a thick girth, are on the move. My other fern already had a rounded top when i bought it and fronds have already emerged, but they don't have the girth of the other fern.Dave Brown wrote:I always do it from underneath. Pulling the frond down until as much of the stipe is visible, then snip at that point.fern Rob wrote:I wonder if I was to cut the Dicksonia antarctica from inside of the crown outwards if that would retain its shape better.